Purchase the full subscription package now and enjoy a 40% discount, along with free updates for future editions.
AS/NZS ISO 14171:2013
$119.22
Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification
Adopts ISO 14171:2010 to specify requirements for the classification of electrode/flux combinations and weld metal in the as-welded condition and in the post-weld heat-treated condition for submerged arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa.
Table of contents
Header
About this publication
Preface
Introduction
1 Scope
2 Normative references
3 Classification
3A Classification by yield strength and 47 J impact energy
3B Classification by tensile strength and 27 J impact energy
4 Symbols and requirements
4.1 Symbol for the process
4.2 Symbol for tensile properties
4.2.1 Multi-run technique
4.2.1A Classification by yield strength and 47 J impact energy
4.2.1B Classification by tensile strength and 27 J impact energy
4.2.2 Two-run technique
4.3 Symbol for the impact properties of all-weld metal or two-run welded joint
4.3A Classification by yield strength and 47 J impact energy
4.3B Classification by tensile strength and 27 J impact energy
4.4 Symbol for type of welding flux
4.5 Symbol for the chemical composition
4.5.1 Solid wire electrodes
4.5.2 Tubular cored electrode/flux combinations
4.6 Symbol for hydrogen content of deposited metal
5 Mechanical tests
5.1 Multi-run technique
5.1A Welding conditions in the classification by yield strength and 47 J impact energy
5.1B Welding conditions in the classification by tensile strength and 27 J impact energy
5.2 Two-run technique
6 Chemical analysis
7 Rounding procedure
8 Retest
9 Technical delivery conditions
10 Examples of designation
10A Classification by yield strength and 47 J impact energy
10B Classification by tensile strength and 27 J impact energy
