Purchase the full subscription package now and enjoy a 40% discount, along with free updates for future editions.
AS/NZS ISO 10865.1:2015
$149.01
Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers, Part 1: Systems for rearward-facing wheelchair-seated passengers
Adopts ISO 10865-1:2012 to specify design and performance requirements and associated test methods, requirements for manufacturer instructions and warnings to installers and users as well as requirements for product labelling and disclosure of test information.
Table of contents
Header
About this publication
Preface
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Design requirements
4.1
5 Performance requirements
5.1 Static strength of wheelchair passenger space components
5.1.1 Forward excursion barrier
5.1.2 Lateral excursion barrier(s)
5.1.3 Rearward excursion barrier(s)
5.2 Wheelchair movement
5.3 Coefficient of friction of floor material
6 Information, identification and instruction requirements
6.1 Identification and labelling of RF-WPS components and subassemblies
6.1.1 Permanent labelling of components
6.1.2 Identification
6.1.3 Information for RF-WPS users
6.2 Instructions for installers
6.2.1 General
6.2.1.1
6.2.1.2
6.2.2 Installation Instructions
6.2.3 Diagrams, drawings and signs
6.2.4 Warnings
6.3 Instructions for vehicle operators
7 Documentation of compliance
7.1
7.2
7.4
7.3
Annex A
A.1 General
A.2 Principle
A.3 Dimensional specifications
Annex B
B.1 General
B.2 Principle
B.3 Equipment to be tested
B.4 Test apparatus
B.4.1
B.4.2
B.4.3
B.4.4
B.4.5
B.4.6
B.5 Test procedures
B.5.1 General
B.5.2 Pretest set-up
B.5.3 Longitudinal movement tests
B.5.3.1 Brakes unlocked, force applied towards FEB
B.5.3.2 Brakes locked, force applied towards FEB
B.5.3.3 Brakes unlocked, force applied away from FEB
B.5.3.4 Brakes locked, force applied away from FEB
B.5.4 Lateral movement tests
B.5.4.1 Brakes unlocked
B.5.4.2 Brakes locked
Annex C
C.1 General
C.2 Principle
C.3 Equipment to be tested
C.4 Test apparatus
C.4.1
C.4.2
C.4.3
C.4.4
C.5 Test procedures
C.5.1 FEB
C.5.2 LEB
C.5.3 REB
Annex D
D.1 General
D.2 Principle
D.3 Specifications
D.3.1 Specifications for a manual surrogate wheelchair (MSWC)
D.3.2 Specifications for the scooter surrogate (SSWC)
Annex E
E.1 General
E.1.1 Rationale, principles and guideline objectives
E.1.2 Layout requirements of the rearward-facing wheelchair station
E.2 Design of the FEB
E.3 Design of REBs
E.4 Design of LEBs
E.5 Maximizing the stabilizing contribution of braked wheelchair wheels
