Specifies requirements for the material, design, testing and performance of battery chargers for domestic or similar use for charging valve-regulated lead-acid batteries used in cyclic applications, e.g. golf buggies and prawning lights.
Table of contents
Header
About this publication
PREFACE
1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.4 SAFETY REQUIREMENTS
1.5 MARKING
1.6 INSTRUCTIONS FOR USE AND CARE
2 DESIGN AND CONSTRUCTION
2.1 CORROSION PROTECTION
2.2 OUTPUT LEADS
2.2.1 General
2.2.2 Connecting leads
2.2.3 Clips and plugs
2.3 INDICATING DEVICES
2.3.1 Input circuit
2.3.2 Rate of battery charge
2.4 CARRYING HANDLE
3 PERFORMANCE REQUIREMENTS
3.1 COMPLETION OF CHARGE
3.2 PERCENTAGE RIPPLE CURRENT
3.3 RATED CHARGING CURRENT
3.4 MAXIMUM VOLTAGE
3.5 RADIO OR TV INTERFERENCE
3.6 MAXIMUM TEMPERATURE OF ACCESSIBLE PARTS
3.7 FLOAT VOLTAGE
4 DETERMINATION OF COMPLIANCE ON THE BASIS OF PERFORMANCE
APPENDIX A
APPENDIX B
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 PROCEDURE
B5 CALCULATION
B6 REPORTING OF RESULTS
APPENDIX C
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 PROCEDURE
C5 REPORTING OF RESULTS
Cited references in this standard
Content history
AS/NZS 2401.2:1995 REC:2024
DR 93264
Please select a variation to view its description.
