AS ISO/ASTM 52927:2024 identically adopts ISO/ASTM 52927:2024, which specifies the principal requirements applied to testing of parts manufactured by additive manufacturing processes
Table of contents
Header
About this publication
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Main characteristics and corresponding test methods
4.1 General
4.2 Selection criteria
5 Part and process testing — Specifications and quality criteria
5.1 General
5.2 Testing the feedstocks
5.3 Monitoring the process
5.4 Testing the part
Annex A
A.1 General
A.2 Surface requirements
A.3 Geometric and dimensional requirements
A.4 Mechanical requirements
A.5 Physical and chemical property requirements
A.5.1 General
A.5.2 Specificities for additive manufacturing
A.5.2.1 General
A.5.2.2 Processing
A.5.2.3 Post-processing
A.6 Performance criteria and quality characteristics
A.6.1 General
A.6.2 Specificities for additive manufacturing
A.7 Specific comment on characteristics
A.7.1 General
A.7.2 Hardness
A.7.3 Tensile strength
A.7.4 Impact strength
A.7.5 Compressive strength
A.7.6 Fatigue strength
A.7.7 Crack extension
Annex B
B.1 General
B.2 Surface requirements
B.3 Geometric and dimensional requirements
B.4 Mechanical requirements
B.5 Formed material requirements
B.5.1 General
B.5.2 Specificities for additive manufacturing
B.5.2.1 General
B.5.2.2 Processing
B.5.2.3 Post-processing
B.6 Performance criteria and quality characteristics
B.6.1 General
B.6.2 Specificities for additive manufacturing
Annex C
C.1 General
C.2 Surface requirements
C.3 Geometric and dimensional requirements
C.4 Mechanical requirements
C.5 Formed material requirements
C.5.1 General
C.5.2 Specificities for additive manufacturing
C.5.2.1 General
C.5.2.2 Process
C.5.2.3 Post-processing
C.6 Performance criteria and quality characteristics
