The objective of this Standard is to specify requirements, test methods and performance criteria for input/output devices connected to a transmission path of a fire detection and alarm system used to receive and/or transmit signals to or from the transmission path, necessary for the operation of the fire detection and fire alarm system and/or fire protection system.
Table of contents
Header
About this publication
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Requirements
4.1 Compliance
4.1.1
4.1.2
4.2 Monitoring of detachable devices
4.3 Requirements for software controlled devices
4.3.1 General
4.3.2 Software design
4.3.3 Storage of programs and data
4.3.3.1
4.3.3.2
5 Tests
5.1 General
5.1.1 Atmospheric conditions for tests
5.1.1.1
5.1.1.2
5.1.2 Mounting arrangements
5.1.3 Operating conditions for tests
5.1.3.1
5.1.3.2
5.1.4 Tolerances
5.1.4.1
5.1.4.2
5.1.5 Functional test
5.1.6 Provision for tests
5.1.6.1
5.1.6.2
5.1.6.3
5.1.7 Test schedule
5.2 Performance and variation in supply parameters
5.2.1 Object of test
5.2.2 Test procedure
5.2.2.1
5.2.2.2
5.2.2.3
5.2.2.4
5.2.3 Requirements
5.3 Dry heat (operational)
5.3.1 Object of test
5.3.2 Test procedure
5.3.2.1 General
5.3.2.2 Initial measurements
5.3.2.3 State of the specimen during conditioning
5.3.2.4 Conditioning
5.3.2.5 Measurements during conditioning
5.3.2.5.1
5.3.2.5.2
5.3.2.6 Final measurements
5.3.3 Requirements
5.3.3.1
5.3.3.2
5.4 Cold (operational)
5.4.1 Object of test
5.4.2 Test procedure
5.4.2.1 General
5.4.2.2 Initial measurements
5.4.2.3 State of the specimen during conditioning
5.4.2.4 Conditioning
5.4.2.5 Measurements during conditioning
5.4.2.5.1
5.4.2.5.2
5.4.2.6 Final measurements
5.4.3 Requirements
5.4.3.1
5.4.3.2
5.5 Damp heat, cyclic (operational)
5.5.1 Object of test
5.5.2 Test procedure
5.5.2.1 General
5.5.2.2 Initial measurements
5.5.2.3 State of the specimen during conditioning
5.5.2.4 Conditioning
5.5.2.5 Measurements during conditioning
5.5.2.5.1
5.5.2.5.2
5.5.2.6 Final measurements
5.5.3 Requirements
5.5.3.1
5.5.3.2
5.6 Damp heat, steady-state (endurance)
5.6.1 Object of test
5.6.2 Test procedure
5.6.2.1 General
5.6.2.2 Initial measurements
5.6.2.3 State of the specimen during conditioning
5.6.2.4 Conditioning
5.6.2.5 Final measurements
5.6.3 Requirements
5.7 Sulfur dioxide (SO2) corrosion (endurance)
5.7.1 Object of test
5.7.2 Test procedure
5.7.2.1 General
5.7.2.2 Initial measurements
5.7.2.3 State of the specimen during conditioning
5.7.2.4 Conditioning
5.7.2.5 Final measurements
5.7.2.5.1
5.7.2.5.2
5.7.3 Requirements
5.8 Shock (operational)
5.8.1 Object of test
5.8.2 Test procedure
5.8.2.1 General
5.8.2.2 Initial measurements
5.8.2.3 State of the specimen during conditioning
5.8.2.4 Conditioning
5.8.2.4.1
5.8.2.4.2
5.8.2.5 Measurements during conditioning
5.8.2.6 Final measurements
5.8.3 Requirements
5.8.3.1
5.8.3.2
5.9 Impact (operational)
5.9.1 Object of test
5.9.2 Test procedure
5.9.2.1 General
5.9.2.2 Initial measurements
5.9.2.3 State of the specimen during conditioning
5.9.2.4 Conditioning
5.9.2.4.1
5.9.2.4.2
5.9.2.4.3
5.9.2.5 Measurements during conditioning
5.9.2.6 Final measurements
5.9.3 Requirements
5.9.3.1
5.9.3.2
5.10 Vibration, sinusoidal (operational)
5.10.1 Object of test
5.10.2 Test procedure
5.10.2.1 General
5.10.2.2 Initial measurements
5.10.2.3 State of the specimen during conditioning
5.10.2.3.1
5.10.2.3.2
5.10.2.4 Conditioning
5.10.2.4.1
5.10.2.4.2
5.10.2.5 Measurements during conditioning
5.10.2.6 Final measurements
5.10.3 Requirements
5.10.3.1
5.10.3.2
5.11 Vibration, sinusoidal (endurance)
5.11.1 Object of test
5.11.2 Test procedure
5.11.2.1 General
5.11.2.2 Initial measurements
5.11.2.3 State of the specimen during conditioning
