The objective of this Standard is to specify: (a) methods of measuring actual energy consumption of lifts, escalators and moving walks on a single unit basis; and (b) methods of carrying out periodic energy verification checks on lifts, escalators and moving walks in operation.
Table of contents
Header
About this publication
Preface
Foreword
Introduction
1 Scope
1.1 General
1.2 Lifts
1.3 Escalators and moving walks
2 Terms and definitions
2.12
2.16
3 Measurement and verification of lift, escalator and moving walk energy usage
3.1 General
3.2 Lift energy measurements or escalator and moving walk power measurements
3.3 Lift, escalator and moving walk energy verification check
3.3.1 General
3.3.2 Lift
3.3.3 Escalator and moving walk
3.4 Multiple lift, escalator and moving walk installations
4 Measurement procedures for a lift installation
4.1 Preliminaries
4.1.1 Instrumentation
4.1.2 Accuracy
4.1.3 Test set up
4.1.4 Coupling points
4.2 Procedures for the energy measurements
4.2.1 Main energy — running
4.2.2 Main energy — idle and standby
4.2.3 Ancillary energy — running
4.2.4 Ancillary energy — idle and standby
4.3 Procedures for the energy verification check
4.3.1 Main current — running
4.3.2 Main current — idle and standby
4.3.3 Ancillary current — running
4.3.4 Ancillary current — idle and standby
5 Measurement procedures for an escalator or moving walk installation
5.1 Preliminaries
5.1.1 Instrumentation
5.1.2 Accuracy
5.1.3 Test set-up
5.2 Procedures for power measurement
5.2.1 Main power — running
5.2.2 Power measured in standby condition
5.2.3 Power measured in autostart condition (if available)
5.2.4 Power measured in slow speed condition (if available)
5.2.5 Power measured in no load condition
5.2.6 Power measured in ancillary equipment
5.3 Procedures for the power verification check
6 Reporting
6.1 General information
6.2 Lift reporting
6.2.1 General
6.2.2 Main energy — running:
6.2.3 Main energy — Idle and standby:
6.2.4 Ancillary energy — running:
6.2.5 Ancillary energy — idle and standby:
6.3 Lift energy usage verification check
6.3.1 General
6.3.2 Main current — running:
6.3.3 Main current — idle and standby:
6.3.4 Ancillary current — running:
6.3.5 Ancillary current —idle and standby:
6.4 Escalator and moving walk energy reporting
6.5 Escalator and moving walk energy verification check reporting
