🔍
Purchase the full subscription package now and enjoy a 40% discount, along with free updates for future editions.
AS 4367-2007
$87.70
Radiocommunications equipment used in the inshore boating radio services band
The objective of this Standard is to specify the essential radiofrequency requirements and minimum standards for radiocommunications equipment to operate in the Inshore Boating Radio Service (IBRS) at frequencies not exceeding 30 MHz, and to provide methods of testing to confirm compliance to those requirements.
Table of contents
Header
About this publication
Preface
1 Scope
2 Definitions
3 Test conditions
3.1 Application
3.2 Normal test conditions
3.2.1 Temperature
3.2.2 Voltage
3.2.2.1 Regulated lead-acid battery power source
3.2.2.2 Nickel-cadmium battery
3.2.2.3 Other power sources
3.3 Extreme test conditions
3.3.1 Temperatures
3.3.2 Voltage
3.3.2.1 Power source (other than battery)
3.3.2.2 Regulated lead-acid battery power sources
3.3.2.3 Nickel-cadmium battery
3.3.2.4 Other power sources
3.4 Nominal test frequency
3.5 Rated peak envelope power (J3E mode)
3.6 Reference audio frequency output power
3.7 Reference sensitivity
3.8 Reference sideband power
3.9 Standard modulating signal (A3E mode)
3.10 Standard modulating signal (J3E mode)
3.11 Standard SINAD ratio
3.12 Standard input signal (A3E)
3.13 Standard input signal (J3E)
4 General requirements
4.1 Equipment markings
4.2 Adjustment mechanism
4.3 Protective design
4.4 Channel operation
4.5 Mandatory distress channels
5 Transmitter requirements
5.1 Emission
5.1.1 Modes
5.1.2 Content
5.2 Nominal carrier frequency
5.3 Frequency error
5.3.1 Limit
5.3.2 Method of test
5.3.2.1 A3E mode
5.3.2.2 J3E mode
5.4 Transmission during channel change (A3E mode)
5.4.1 Limit
5.4.2 Method of test
5.5 Carrier power (A3E mode)
5.5.1 Limit
5.5.2 Method of test
5.6 Rated peak envelope power (J3E mode)
5.6.1 Limit
5.6.2 Method of test
5.7 Modulation limiting
5.7.1 Limit
5.7.2 Method of test
5.8 Modulation sensitivity
5.8.1 Limit
5.8.2 Method of test
5.9 Automatic level control
5.9.1 Limit
5.9.2 Method of test
5.10 Out-of-band emission suppression (A3E mode)
5.10.1 Limit
5.10.2 Method of test
5.11 Spurious emissions (A3E mode)
5.11.1 Limit
5.11.2 Method of test
5.12 Unwanted emission suppression (J3E mode)
5.12.1 Limits
5.12.2 Method of test
6 Receiver requirements
6.1 Receiver modes
6.2 Reference sensitivity
6.2.1 Limit
6.2.2 Method of test
6.2.2.1 General
6.2.2.2 A3E mode
6.2.2.3 J3E mode
6.3 Maximum squelch level
6.3.1 Limit
6.3.2 Method of test
6.4 Adjacent channel selectivity
6.4.1 A3E mode
6.4.1.1 Limit
6.4.1.2 Method of test
6.4.2 J3E mode
6.4.2.1 Limit
6.4.2.2 Method of test
6.5 Spurious response immunity
6.5.1 Limit
6.5.2 Methods of test
6.5.2.1 A3E mode
6.5.2.2 J3E mode
6.6 Conducted spurious radiation
6.6.1 Limit
6.6.2 Method of test
6.7 Rated audio frequency output power
6.7.1 Limit
6.7.2 Method of test
Cited references in this standard
Please select a variation to view its description.
| Published | 22/01/2007 |
|---|---|
| Pages | 12 |
Please select a variation to view its pdf.
