Adopts ISO 10535:2006 to specify requirements and test methods for hoists and body-support units intended for the transfer of disabled persons as classified in AS/NZS ISO 9999.
Table of contents
Header
About this publication
Preface
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements and test methods
4.1 General requirements
4.1.1 Risk analysis
4.1.2 Ergonomic factors
4.1.3 Noise
4.2 General test methods
4.2.1 Test conditions
4.2.2 Test equipment
4.2.2.1
4.2.2.2
4.2.2.3
4.2.2.4
4.2.2.5
4.2.2.6
4.2.2.7
4.2.2.8
4.2.2.9
4.2.3 Permissible errors of test equipment
4.2.4 Test report
4.3 Safety requirements
4.3.1 Safety and performance requirements
4.3.1.1
4.3.1.2
4.3.1.3
4.3.1.4
4.3.1.5
4.3.1.6
4.3.1.7
4.3.1.8
4.3.1.9
4.3.1.10
4.3.1.11
4.3.1.12
4.3.1.13
4.3.1.14
4.3.1.15
4.3.1.16
4.3.1.17
4.3.1.18
4.3.1.19
4.3.1.20
4.3.1.21
4.3.1.22
4.3.1.23
4.3.1.24
4.3.1.25
4.3.1.26
4.3.2 Test methods for general safety requirements
4.3.2.1
4.3.2.2
4.3.2.3
4.3.2.4
4.3.2.5
4.3.2.6
4.3.2.7
4.3.2.8
4.3.2.9
4.3.2.10
4.3.2.11
4.3.2.12
4.3.2.13
4.3.2.14
4.3.2.15
4.3.2.16
4.3.2.17
4.3.2.18
4.3.2.19
4.3.2.20
4.3.2.21
4.3.2.22
4.3.2.23
4.3.2.24
4.3.2.25
4.3.2.26
4.4 Requirements for body-support units
4.5 Central suspension point
4.5.1 Requirements for central suspension point
4.5.2 Test method for the central suspension point
4.6 Spreader bar
4.6.1 Requirements for spreader bar
4.6.1.1
4.6.1.2
4.6.1.3
4.6.1.4
4.6.2 Test methods for the spreader bar
4.6.2.1
4.6.2.2
4.6.2.3
4.6.2.4
4.7 Performance
4.7.1 Requirements for performance
4.7.1.1
4.7.1.2
4.7.1.3
4.7.2 Test methods for performance
4.7.2.1
4.7.2.2
4.7.2.3
4.8 Rate (velocity) of lifting and lowering
4.8.1 Requirements for rate (velocity) of lifting and lowering
4.8.1.1
4.8.1.2
4.8.2 Test methods for rate (velocity) of lifting and lowering
4.8.2.1
4.8.2.2
4.9 Operating forces/torques
4.9.1 Requirements for operating forces/torques
4.9.2 Test methods for operating forces/torques
4.10 Durability
4.10.1 Requirements for durability
4.10.2 Test methods for durability
4.10.2.1
4.10.2.2
4.10.2.3
4.10.2.4
4.10.2.5
4.10.2.6
4.10.2.7
4.10.2.8
4.10.2.9
4.11 Hydraulic components
4.11.1 Requirements for hydraulic components
4.11.1.1
4.11.1.2
4.11.1.3
4.11.1.4
4.11.1.5
4.11.1.6
4.11.1.7
4.11.2 Test methods for hydraulic components
4.11.2.1
4.11.2.2
4.12 Pneumatic components
4.12.1 Requirements for pneumatic components
4.12.1.1
4.12.1.2
4.12.1.3
4.12.2 Test methods for pneumatic components
4.12.2.1
4.12.2.2
4.12.2.3
4.13 Information supplied by the manufacturer
4.13.1 General
4.13.2 Marking
4.13.3 Instructions for use
5 Mobile hoists — Specific requirements and test methods
5.1 General requirements
5.2 Static strength
5.2.1 Requirements for static strength
5.2.2 Test methods for static strength
5.3 Static stability
5.3.1 Requirements for static stability
5.3.2 Test methods for static stability
5.3.2.1 Test procedures for 5.3.1 a), b) and c)
5.3.2.2 Unloaded
5.3.2.3 Loaded
5.4 Immobilizing device (brakes)
5.4.1 Requirements for immobilizing device (brakes)
5.4.2 Test methods for immobilizing device (brakes)
5.5 Moving forces
5.5.1 Requirements for moving forces
5.5.2 Test methods for moving forces
5.6 Instructions for use
6 Standing and/or raising hoists — Specific requirements and test methods
6.1 General requirements
6.2 Static strength
6.2.1 Requirements for static strength
6.2.2 Test method for static strength
6.3 Static stability
6.3.1 Requirements for static stability
6.3.2 Test methods for static stability
6.3.2.1 Test procedures for 6.3.1 a), b) and c)
6.3.2.2 Unloaded
6.3.2.3 Loaded (backwards stability)
6.3.2.4 Loaded (forwards stability)
6.3.2.5 Loaded (sideways stability)
6.4 Immobilizing device (brakes)
6.4.1 Requirements for immobilizing device (brakes)
6.4.2 Test methods for immobilizing device (brakes)
6.5 Moving forces
6.5.1 Requirements for moving forces
6.5.2 Test methods for moving forces
6.6 Durability
6.6.1 Requirements for durability
6.6.2 Test methods for durability
6.6.2.1
6.6.2.2
6.6.2.3
6.6.2.4
6.6.2.5
6.6.2.6
6.6.2.7
6.6.2.8
6.7 Instructions for use
7 Stationary hoists — Specific requirements and test methods
7.1 General requirements
7.2 Specific safety requirements
7.2.1 Requirements for specific safety requirements
7.2.1.1
7.2.1.2
7.2.1.3
7.2.1.4
7.2.1.5
7.2.1.6
7.2.2 Test methods for specific safety requirements
