Adopts ISO 10984-2:2009 to specify laboratory methods for determining the embedding strength of solid timber, glued laminated timber and wood-based sheet products with dowel-type fasteners.
Table of contents
Header
About this publication
Preface
Introduction
1 Scope
2 Normative references
3 Terms and definitions
3.4 Fastener section dimension
4 Symbols and abbreviated terms
5 Requirements
6 Test method
6.1 Principle
6.2 Test pieces
6.3 Apparatus
6.3.1
6.3.1.1
6.3.1.2
6.4 Preparation of test pieces
6.5 Procedure
6.5.1 Apparatus calibration
6.5.2 Placement of fastener
6.5.3 Placement of test piece in apparatus
6.5.4 Transducer location
6.5.5 Estimation of maximum load
6.5.6 Application of load
6.5.7 Recording of deformation
6.5.8 Determination of moisture content and density
6.6 Results
6.6.1 Calculations
6.6.1.1
6.6.1.2
6.6.1.3
6.6.2 Calibration of load-versus-deformation curve
