🔍
Purchase the full subscription package now and enjoy a 40% discount, along with free updates for future editions.
AS/NZS 4886:2007
$125.14
Domestic solid fuel burning appliance — Pellet heaters — Determination of flue gas emission
Specifies a method for determining the rate of particulate emission from batch fed domestic pellet burning appliances.
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Application
1.2.1 General
1.2.2 Included appliances
1.2.3 Excluded appliances
1.3 Referenced documents
1.4 Definitions
1.5 Principle
2 Apparatus and reagent
2.1 General
2.2 Ambient temperature measurement system
2.3 Ambient air pressure measurement system
2.4 Weight determination system
2.5 Sampling train
2.6 Draught gauge
2.7 Desiccators
2.8 Acetone
2.9 Dishes
2.10 Carbon dioxide analyzer (optional)
3 Configuration of test equipment
3.1 General
3.2 Dilution tunnel
3.2.1 Hood
3.2.2 Connectors
3.2.3 Bends
3.2.4 Sampling section
3.2.5 Extraction fan
3.2.6 Component assembly
3.2.7 Pitot tube location
3.3 Sampling train
3.3.1 General
3.3.2 Probe
3.3.3 Filter coupling
3.3.4 Temperature probes
3.3.5 Dryer coupling
3.3.6 Exhaust pump
3.3.7 Joint seals
4 Calibrations
4.1 General
4.2 Dry gas meter
4.3 Dilution tunnel
4.4 Weighing instruments
4.5 Temperature measurement
4.6 Differential pressure manometer and draught gauge
4.7 Carbon dioxide analyzer
5 Test fuel
6 Test procedure
6.1 General
6.2 Dilution hood and tunnel
6.3 Dilution tunnel
6.3.1 General
6.3.2 Flue pipe draft
6.4 Test preparation
6.4.1 Appliance preparation
6.4.2 Sample collection system
6.5 Test fuel load
6.6 Burn cycles
6.7 Sampling train operation
6.8 Sample treatment
6.9 Sample measurement
6.10 Calculations
6.10.1 Sample weight
6.10.2 Sample flow volume
6.10.3 Dilution tunnel flow volume
6.10.4 Volume ratio
6.10.5 Particulate emission weight
6.10.6 Particulate emission factor
6.10.7 Burn-rate emission factors
6.10.8 Appliance particulate emission factor
7 Maximum allowable appliance particulate emission factor
7.1 Pellet burning appliances
7.2 Valid tests
8 Testing documentation and test reports
8.1 General
8.2 Documentation
8.3 Test report
8.4 Retention of records
8.5 Published results
9 Variation from tested appliance
9.1 General
9.2 Retesting exemption
10 Marking
Appendix A
A1 Scope
A2 Principle
A3 Apparatus
A4 Procedure
A5 Report
Appendix B
B1 Scope
B2 Principle
B3 Procedure
B4 Report
Appendix C
C1 Scope
C2 Principle
C3 Apparatus
C4 Calibration procedure
C5 Calibration before each use
Cited references in this standard
Content history
DR 06583
AS/NZS 4886:2007 REC:2021
Please select a variation to view its description.
| Published | 23/02/2007 |
|---|---|
| Pages | 22 |
Please select a variation to view its pdf.
